Construction features:
304 Stainless steel heavy duty stainless steel welded C frame.
20 Gallon stainless steel overflow tank.
Stainless steel cover for overflow tank.
12 hose 304 stainless steel feeding manifold.
All contact parts are stainless steel, sanitary, Teflon, viton and hoses.
Special seals or hoses by order.
Calibrated guide for fast height changeovers.
Filling machine mounted on 4 heavy duty casters.
Leveling of machine by 1 inch 304 stainless steel leveling screws.
Click to view YouTube video
Control panel features:
Omron PLC for all machine logic functions, special modifications on programs available for special adaptations.
Frequency control drive for pump speed, acceleration and deceleration.
Front panel bottle filling time adjustment through Omron Timer.
Front panel conveyor speed control for machine sold with conveyor.
Front panel mounted bottle counter.
Front panel Start and Emergency STOP for easy access.
Front panel nozzle code for changing nozzle quantities.
Fiber optic sensors by Omron standard for container gating.
Expandable to 20 nozzles to increase speed.
No bottle no fill PLC controlled.
Main components features:
96 Gallon per minute, 1 Hp, 3phase, 316 stainless steel centrifugal pump.
Hardened Stainless steel calibrated shafts with linear bearings for nozzle rack movement smoothness and durability.
10 inch stroke air cylinder with magnetic sensors for nozzle up and down movement.
316L Stainless steel sanitary check valve mounted on pump.
Hand wheel and shaft mounted stoppers for height and stroke adjustment.
Standard features:
Nozzle spacing fully adjustable through top screw.
Container height adjustment from 1 to 16 inches high.
Nozzle stroke adjustments from 0 to 10 inches.
Entry and exit bottle gating cylinders adjustable, sideways, up and down and inside and outside.
Will work with plastic or glass containers.
No change parts needed for various types of containers.
Air filter-regulator and safety lockout valve included.
Spacing and additional bottle control obtained by flow controls mounted on air gating cylinders.
Electric and pneumatic requirements:
220 Volts, 60Hz, 10 Amps.
5 CFM @ 80 p.s.i.
Additional Prep Fees May Apply
