8 Ton Glycol Chiller | Chillers

    Browse our other
    Chillers

    Item Details

    Item Id 389982
    Item #: 389982
    Item: 8 Ton Glycol Chiller
    Model #: 11-1138-311
    Serial #: N/A
    Year Built: 2020
    Location: Florida
    Price: $13,113.00

    Description

    Our chillers are NOT off-the-shelf and NOT FROM CHINA. We don't buy cheap HVAC equipment (like an outdoor condensing unit) from your local refrigeration shop, pair it with a heat exchanger and call it our own. We design and engineer from ground up, often times based on customer requirements.

    This is a 2020 model with all the buttons and bows, offered at a discounted price. MSRP is $17324.00.

    - Designed to deliver 8-tons with 33% propylene glycol as a medium. Some manufacturers say that their chiller is glycol rated, that may be true, but does it deliver the rated tonnage with glycol as a medium? Most chillers are tonnage rated with water, if glycol is used as a medium, the output of the chiller is decreased below that of the unit rating.

    - High ambient temperature operation; up to 110 F and as lows as 30 F, AND delivers the nominal tonnage rating in those conditions. Most manufactures say their equipment will operate in those conditions, but it is with a decreased output.

    - Includes Sensors for Refrigerant Pressure, Medium Temperature (IN/OUT), Medium Flow and Display (Supply). Data is delivered via our ROI harness for display on your PLC controller. Medium Flow Sensor features a local display, sensors do not have to be connected to PLC controller in order for chiller to operate, these are ancillary options installed.

    - High-End components include Baldor Motors, Copeland Compressors, Copper/Stainless brazed plat exchangers, Sporlan Valves, composite fan blades, stainless fasteners, plumbing and chassis.

    - Fault Switches installed include High Pressure, Low Pressure, Low Temperature, Medium Flow (integrated with sensor)

    - Features:

    - Our exclusive System Status Interface, a local interface for managing and observing important functions such as Medium Temperature Setpoint and System Fault Indications.

    - Our exclusive Remote Output Integration harness. This harness includes all data outputs from our SSI panel and allows for the integration into a central control and monitoring system. If well equipped, all sensor data outputs are also included in the ROI harness.

    - Exterior condenser filters, reduce cleaning intervals, increase longevity and improve performance

    - Coated aluminum condenser fins to increase longevity

    - Quick-Access panels offer convenient access to piping connections, refrigerant devices and control components.

    - Analog Control System that utilizes CE/UL approved components

    - Compressor heater, for easy start-up in low ambient temperatures, Self-Regulating

    - Discharge By-Pass system allows for chilled medium production during cold ambient temperatures

    Specifications:

    COOLING METHOD: AIR-COOLED

    NOMINAL MEDIUM FLOW RATE: 20 GPM

    MEDIUM: PROPYLENE GLYCOL/WATER OR WATER

    MEDIUM RATIO: 33% GLYCOL

    MEDIUM SETPOINT: 46 F

    MEDIUM PRESSURE DROP: 10.15 PSI

    UNIT OUTPUT: 96000 BTU

    SERVICE: 460/3/60

    CURRENT: 25.90 A**

    POWER: 15.90 kW**

    COMPRESSORS: 1, SCROLL

    COMPRESSOR OIL: POE ***

    REFRIGERANT: R422B

    CONDENSERS: 2

    CONDENSER MATERIAL: AL FINS/CU TUBES

    HIGH AMBIENT: 110 F

    LOW AMBIENT: 30 F

    ALTITUDE LIMIT: 2254 FT

    CABINET MATERIAL: 316 SS

    *OPERATIONAL @ 50Hz, WITH APPROXIMATELY 17-18% REDUCED OUTPUT CAPACITY

    **CURRENT/POWER IS STATED FOR INSTALLED COMPONENTS ONLY AND ARE CALCULATED USING DESIGN PARAMETERS, SEE EQUIPMENT NAMEPLATES FOR SERVICE SIZING.

    ***USE OF CPVC/PVC/ABS MATERIAL FOR CHILLED WATER PLUMBING IS ADVISED AGAINST WHEN POE COMPRESSOR OIL IS USED.

    All Sales are as per our Terms and Conditions and our Warranty Statement, ask us for copies of these documents.
    (Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)

    Equipment is in stock, and will be tested and verified prior to shipping. Shipping is approximately 1-week post payment. LTL Ground Shipping to commercial addresses in lower 48 Contiguous United States or Canada. Destination liftgate not allowed.

    Additional Prep Fees May Apply

    Shipping

    Height: 35.00 in
    Width: 48.00 in
    Length: 60.00 in
    Weight: 800.00 lbs
    Prep Fee: N/A
    Registered Customers can request shipping quotes free of charge. Shipping Quotes take 1-3 Business Days to Process

    charticon This item has  today
    moneyicon Have one to sell?
    Sell
    Need Financing? FinanceLink

    Testimonials

    • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
    • "The strength of their site is how often our machinery comes up on web searches." - John G.
    • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
    • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
    • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
    • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
    • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
    • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.